Go down
avatar
Admin
Posts : 14
Join date : 2017-10-15
Age : 31
Location : saratoga
View user profilehttp://me7inlinetuning.forumotion.com

Tools needed to read and write the ecu  Empty Tools needed to read and write the ecu

on Tue Mar 06, 2018 7:53 am
To read abd write our cars there's a few tools that can be used. Hands down the best tool to use is mpps. Mpps is a flashing suite that will read and write threw the obd2 port along with bootmode flashing if and when you brick your ecu. Tje most common versions of mpps are v12/13, v16, v18 and v21. I have used clone v12/13 and version 16 first hand they work without issue. V16 can read and write the eeprom too. Eeprom writing is for immo immo offing the ecu, cloning or adapting ecus.
The clone cables can be bought on ebay or Amazon for about $20 or less. You'll need a Windows computer to run the software that came with the cable
avatar
Admin
Posts : 14
Join date : 2017-10-15
Age : 31
Location : saratoga
View user profilehttp://me7inlinetuning.forumotion.com

Tools needed to read and write the ecu  Empty Re: Tools needed to read and write the ecu

on Fri Apr 27, 2018 9:07 am
This is a example of  v13 cable from ebay. it will read and write any mk4 generation car and recover if the ecu bricksTools needed to read and write the ecu  Untitl14
Back to top
Similar topics
Permissions in this forum:
You cannot reply to topics in this forum